BRAND compatibility

REALME

OPPO

MODEL compatibility

OPPO

Reno 5 4G

RENO 6

A95

REALME

REALME 8 PRO

Package includes:

• 1 x BQ25975 CHARGER IC

Color black

WARRANTY   Yes  Manufacturing defects only

Weight       8 gram

Compliant with mobile this IC:  BQ25975 IC

ic (chip ) connector Back side pin no. : BQ25975 CHARGER IC

Specifications Specifcae

* Application: Mobile Phone

* Brand Name: IC BQ25975 IC 

* Type: Drive IC

* Place of Origin: China

* Model Number: BQ25975 CHARGER IC

* Supply Voltage: 1.0-6V

* Dissipation Power: 0.6w

* Operating Temperature: 0-310

* Condition: New

* Package: BGA

*   tested with high quality 100%

* Replacing your broken,damaged or unusable Intermediate frequency

Covered in Warranty

No warranty

No Returns

FOR ANY FURTHER CLARIFICATIONS, PLEASE CONTACT US HERE OR CALL US ON +919895333473

The post BQ25975 CHARGER IC first appeared on mobileic.

OSS TEAM

Model: T12 Plus

Material: flame retardant material

Color: yellow

voltage range

: AC100~240V

Peak power: 75W

Temperature range: 100~480°C

Temperature accuracy: ±5°C/40°F

Working conditions:: 10~50°C, humidity <80%

Heating method: intelligent PID control

Features: LCD display, adjustable sleep time, automatic sleep

6 seconds to melt tin and heat quickly

User’s manual

T12 series welding table instruction and operation

Automatic dormancy

Adjustable dormancy time

The temperature returns quickly

6 seconds to melt tin

How the welding table works

Meets lead-free soldering standard
Anti-static “skin effect” protective shell
When the no-operation time reaches the set sleep time, the soldering station will. automatically enter the sleep mode. At this time, it is necessary to press any key of the host or pick up the handle to restore the working mode of the soldering station.
About the problem that the temperature jump of the new heating core prompts the error
The new heating core used for the first time needs to be aged before it can work stably (there are many domestic heating core manufacturers, the quality is uneven, and the aging time is also different, about 3 ~ 10 minutes). The temperature jump is large when it is just installed, and even the error is prompted, which belongs to the normal range. At this time, please adjust the temperature of the welding table to 350 °C and age for a period of time before it can be used normally. [OSS heating core does not need aging]

• This soldering station incorporates an automatic sleep function that extends the life of the tip by reducing the temperature of the tool when it is not in use.

It is 3-5 times longer than the traditional way, and it also saves electricity.

• When the no-operation time reaches the set sleep time, the soldering station will automatical enter the sean node restore the working mode of the sady ing

station.

• This ework efficiency.

1. Control panel description

II. Basic operations

1. Normal use mode: In the power-on state, press the temperature plus or minus key todirectly adjust the temperature value (100-480 degrees Celsius).
2. Function setting mode: In the power-on state, press the menu key for 1 second and then release it to enter the parameter setting function.
3. Menu options: P- I,P -2,P – 3, click the menu key function options. Long press the menu key and it will automatically save and exit the setting interface.

When the no-operation time reaches the set sleep time, the soldering station will automatically enter the sleep mode. At this time, it is necessary to press any key of the host or pick up the handle to restore the working mode of the soldering station.

Ill. Parameter setting:

• The temperature can be increased or decreased through the temperature adjustment key. Click/one Press the temperature increase or decrease key to set the temperature;
• Press and hold the function menu button to enter/exit the setting page, and click to select the setting item:

P – 1: Sleep setting, adjust to OFF to turn off the sleep function; adjust 1-120 min, turn on the sleep function of delay time, if the handle does not move, wait for the corresponding time,

the wedelag station automatically enters sleep, cooling

without heating; exit the save setting.

P – 2: Set the sound switch, adjust it to OFF to turn off the prompt sound, and adjust it to ON to turn on the prompt sound; exit the save setting.

P – 3: Temperature error calibration setting, with a calibration range of + 50 °C. Make the soldering station work normally and heat it to the set temperature, correctly place the welderingzale at the temperature measuring position rature of the temperattric iron temperature measuring instrument, read the temperature of the temperature measuring instrument and the set temperature of the soldering station, if the temperature of the temperature measuring instrument is greater than the set temperature of the soldering station,

take the positive error value, operate the

increase/decrease key to adjust the calibration value of the soldering station to the current positive error value; exit and save the setting. If the temperature of the thermometer is less than the set temperature of the soldering station, take the negative error value, and operate the increase/decrease button to adjust the calibration value of the soldering station to the current negative error value; exit and save the setting.

IV. Error code:

5-E: The welding station is not connected to the handle/heating core correctly;

Solution: Connect the handle/heating core correctly.

OCP: Heating core short circuit/heating core mismatch error; solution: remove the heating core, check whether the heating core is short circuit, if so, replace the heating core.

OPP: The welding station is abnormally heated and an error is reported: solution: remove the heating core and reinsert the heating core.

Notes:

1 horder lo extend the service life of the soldering tip, please do not adjust the temperature in to high for a long time. Generally, 350 degrees is the most suitable temperature for welding.

2 please do a good job in the maintenance of soldering tip, keep the tip clean and solder maintenance, prevent tip oxidation.

Replace the soldering tips, especially from different manufacturers, please select the coresponding model and recalibrate the temperature.

the new soldering iron head, especially domestic head, need to go through aging to work stable, just inserted the temperature jump is large, even the error is normal. Please dispatch the temperature to 350 °C

about aging to use for a period of time.

Site welding table reports the error “5-E, “OCP” or “OPP”, check that the plug and welding head of the handle are inserted properly and that the handle and welding head are not damaged.

§ When doing important welding work, please ensure that your power socket is connected to the ground. If necessary, please connect the independent ground connector at the end al the welding table to the ground reliably through the wire.

7. Do not try to insert the handle of other manufacturers into the soldering console.

The incompatible handle may cause vibration and wake up failure, hardware damage, soldering tip temperature loss, fire and other serious consequences.

The post T12 PLUS OSS YELLOW SERIES SOLDERING IRON first appeared on mobileic.

The post CAR4|AMAOE CAR4 BGA REBALLING STENCIL FOR MCIMX6U6AVM08AC AUTOMOTIVE CHIP STEEL MESH first appeared on mobileic.

NASAN NA-PAD8 UNIVERSAL SILICONE PAD SUCTION MAT FOR LCD SEPARATE SCREEN HEATING FIXED GLASS OCA GLUE CLEANING REPAIR MAT

The post NASAN WATCH DISPLAY MAT first appeared on mobileic.

1 PCS WATERPROOF SEALS IPHONE 12 WATERPROOF STICKER FRONT FRAME GLUE STICKER TAPE  HOUSING FRAME WATERPROOF SEAL 

BLACK COLOR STICKER Apple 12

PROFESSIONAL REPAIR SKILLS INSTALLATION LCD FRAME WATERPROOF ADHESIVE STICKERS FOR IPHONE 12

PRE-CUT DESIGNED WATERPROOF STICKER FOR IPHONE 12

ഐഫോൺ ഫ്രണ്ട് ഫ്രെയിമിനുള്ള ഐഫോൺ 12 നുള്ള വാട്ടർപ്രൂഫ് ഗ്ലൂ സ്റ്റിക്കർ ടേപ്പ്

The post IPHONE 12 WATERPROOF STICKER FRONT FRAME GLUE STICKER TAPE HOUSING FRAME WATERPROOF SEAL first appeared on mobileic.

QM78038 IC

QM78038 MOB IC

QM78038  F14VD46

QM78038  F14VD46 IC

QM78038  F14VD46  MOB IC

BRAND compatibility

MODEL compatibility

Color black

WARRANTY   Yes Manufacturing defects only

Weight       8gram

Compliant with mobile this IC:

ic (chip ) connector Back side pin no. :

Specifications  Specifcae

• Application: Mobile Phone
• Brand Name: IC
• Type: Drive IC
• Place of Origin: China
• Model Number:
• Supply Voltage: 1.0-6V
• Dissipation Power: 0.6w
• Operating Temperature: 0-310
• Condition: New
• Package: BGA
•   tested with high quality 100%
• Replacing your broken,damaged or unusable Intermediate frequency

Covered in Warranty

No warranty

No Returns

DELIVERY TIME OF THE PRODUCT

THE DELIVERY TIME OF THE PRODUCT DEPENDS ON THE AVAILABILITY OF THE PRODUCT & THE SHIPPING METHOD SELECTED AT THE TIME OF CHECKOUT. IN MOST CASES, WHEN AN ORDER IS RECEIVED IT IS SENT TO OUR ORDERING DEPARTMENT & IS COMPLETED WITHIN THE TIME SHOWN WHILE MAKING THE ORDER.

FOR ANY FURTHER CLARIFICATIONS, PLEASE CONTACT US HERE OR CALL US ON 09895333473

The post QM78038 first appeared on mobileic.

SAMSUNG S10+ WIFI IC WI-FI MODULE WIRELESS CHIP BCM43436LH

BCM43436 IC

BCM43436 MOBILE IC

BCM43436LH

BCM43436LH IC

BCM43436LH MOBILE IC

BRAND compatibility

SAMSUNG BCM43436

MODEL compatibility

SAMSUNG S10+ BCM43436

Color black

WARRANTY   Yes Manufacturing defects only

Weight       8gram

Compliant with mobile this IC:WIFI BCM43436

ic (chip ) connector Back side pin no. : 77

Specifications 

• Application: Mobile Phone
• Brand Name: IC
• Type: Drive IC
• Place of Origin: China
• Model Number:
• Supply Voltage: 1.0-6V
• Dissipation Power: 0.6w
• Operating Temperature: 0-310
• Condition: New
• Package: BGA
•   tested with high quality 100%
• Replacing your broken damaged or unusable Intermediate frequency

Covered in Warranty

No warranty

No Returns

DELIVERY TIME OF THE PRODUCT

THE DELIVERY TIME OF THE PRODUCT DEPENDS ON THE AVAILABILITY OF THE PRODUCT & THE SHIPPING METHOD SELECTED AT THE TIME OF CHECKOUT. IN MOST CASES, WHEN AN ORDER IS RECEIVED IT IS SENT TO OUR ORDERING DEPARTMENT & IS COMPLETED WITHIN THE TIME SHOWN WHILE MAKING THE ORDER.

FOR ANY FURTHER CLARIFICATIONS, PLEASE CONTACT US HERE OR CALL US ON 09895333473

The post BCM43436 first appeared on mobileic.

RL 069B

https://www.youtube.com/watch?v=r33PbRJkMfs

1. POWER ON AND OFF: LONG PRESS THE POWER BUTTON TO HEAT UP RELEASE THE POWER BUTTON TO STOP HEATING.

2. PLACE SMALL ROSIN, PREHEAT FOR 2 SECONDS, START ATOMIZATION.

3. WHEN THE SMOKE IS OUTPUT, AIM THE GLASS COVER OUTLET AT THE DETECTION AREA.

4. CONNECT THE MAINTENANCE BOOT LINE, SHORT-CIRCUIT FAULTS

CAN BE QUICKLY FOUND.

REMINDER

1. THE GLASS COVER AND HEATING ELEMENT ARE CONSUMABLES, WHICH ARE

NOT COVERED BY THE WARRANTY, PLEASE USE THEM CORRECTLY.

2. AFTER THE GLASS COVER IS USED, THERE WILL BE RESIDUAL HEAT, BE CAREFUL

OF BURNS.

PRODUCT LIST:

1 SET OF DETECTOR

1 CHARGING CABLE

2 GLASS COVER

The post ROSIN SHORT CIRCUIT DETECTOR first appeared on mobileic.

77647-21 chip

77647 21

7764721

77647

The post 77647-21 first appeared on mobileic.